|
Embedded ADSL Module
Embedded ADSL communication module – IB02 designed for a lot of applications, such as Hand device, Security Router, embed systems. When it is running, the power consumption only 2.3 watt, and when standby, power consumption only 2 watt.
IB02 utilizes a power-efficient MIPS32 processor running at up to 240 MHz clock speed, highly-efficient DC/DC circuit inside, reduce power consumption effectively, It offers a wide variety of on-board interface such as RS232 (TTL), USB device (USB 1.1), Ethernet 10/100M, and other IO’s, it is easy to configuration using inside WEB server and Telnet mode, and also using CLI command with local RS232 (TTL) port setup the module.
IB02 support ADSL, ADSL2, ADSL2+, and its upstream 1Mbps, downstream 24Mbps (ADSL2+)
- DSL modem supports standards for ADSL, ADSL2 and ADSL2+
- Versions for Annex A (PSTN) and Annex B (ISDN).
- Downstream rates up to 24 Mbit/s, upstream rates up to 1 Mbit/s.
- Upstream rates up to 3.5 Mbit/s in Annex M mode.
- Supports PPPoA, PPPoE, MPoA and CLIP network protocols.
- 10/100baseT, Auto-MDI/MDIX Ethernet port.
- RS232 and RS485 serial port operation from 300 to 115200 bit/s.
- Ethernet port supports TCP/IP, Modbus TCP and other IP protocols.
- Serial port supports Modbus RTU, Modbus ASCII, DNP3, IEC 60870.5 and other protocols.
- Compatible with various SCADA protocols.
- Built-in DHCP server.
- NAT router for remote access to devices attached to Ethernet and Serial ports.
- Configuration via Web browser, Telnet and serial command port.
- Extended temperature range.-10°C to +70°C
Dimension:
|
Embedded Communications Module 
