|
Embedded ADSL Module
The embedded-ADSL IB02R module family delivers leading performance, low power operation and rich peripheral interface support for a wide variety of applications, including embedded system, MCU system, and more. The module utilizes a power-efficient MIPS32 processor running at up to 240 MHz clock speed. It offers a wide variety of on-board interface such as RS232 (TTL), USB device (USB 1.1), Ethernet 10/100M, and others.
The RS232 interface support 300bps to 115200bps connects serial devices directly (TTL), such as, PLCs, MCU system, and more. The RS232 interface offers serial devices to the network over industry standard in many applications.
IB02R is ideal for applications requiring COM ports, it establishes a connection between the local serial device and internet without added software, it is easy to configuration using inside WEB server and Telnet mode. Support ADSL, ADSL2/2+ standard, Upstream 1Mbps, downstream 24Mbps (ADSL2+), the serial port, can connect most of serial device
- DSL modem supports standards for ADSL, ADSL2 and ADSL2+
- Versions for Annex A (PSTN) and Annex B (ISDN).
- Downstream rates up to 24 Mbit/s, upstream rates up to 1 Mbit/s.
- Upstream rates up to 3.5 Mbit/s in Annex M mode.
- Supports PPPoA, PPPoE, MPoA and CLIP network protocols.
- 10/100baseT, Auto-MDI/MDIX Ethernet port.
- RS232 and RS485 serial port operation from 300 to 115200 bit/s.
- Ethernet port supports TCP/IP, Modbus TCP and other IP protocols.
- Serial port supports Modbus RTU, Modbus ASCII, DNP3, IEC 60870.5 and other protocols.
- Compatible with various SCADA protocols.
- Built-in DHCP server.
- NAT router for remote access to devices attached to Ethernet and Serial ports.
- Configuration via Web browser, Telnet and serial command port.
- Extended temperature range.-10°C to +70°C
Hardware:
BCM6338 -MIPS32, 240-MHz processor
10/100M Base-T
USB 1.1 PHY
Serial Flash
Interface:
ADSL －2 pin 2.54mm
USB －4pin 2.54mm
Ethernet －4pin 2.54mm, 568B
RS232 － 2pin 2.54mm , TTL ()
IO – 6pin 2.54mm (undefinition)
ADSL Features:
ANSI T1.413 Issue 2
ITU G.992.1 A (G.dmt)
ITU G.992.2 A (G.lite)
ITU G.994.1 (G.HS) in ADSL layer
ITU G.994.1, G.996.1
ITU992.5(ADSL 2+)
Ethernet Over ATM ( MpoA, RFC 1483 Bridge Mode )
Ethernet Over ATM ( MpoA, RFC 1483 Router Mode )
PPP Over ATM ( PPPoA, RFC 2364 )
IP Over ATM ( CLIP, RFC 1577 )
PPP Over Ethernet ( PPPoE, RFC 2516 )
Environment:
Operating Temperature: -20°C ~ 70°C;
Storage Temperature:- 40°C ~ 90°C;
Operating Humidity: 10% ~ 90% non-condensing;
Storage Humidity: 5% ~ 90% non-condensing
Power:
5VDC 2.5w
Dimension:
L: 80mm (3.15 inch)
W: 60mm (2.36 inch)
H: 14mm (0.55 inch)
|
Embedded Communications Module 
