|
Embedded ADSL Module
IT02 is easy-to-use and cost-effective module, built on leading of dsl technology ARM7 200MHz microprocessor, it is fully pin-compatible and without added software and hardware, for custom embedded applications, IT02 offers enterprise-class security, delivers a powerful, secure, and compact Ethernet, a rich set of peripherals.
Use high performance DC/DC circuit design, increased power efficiency, and the dimensions only: 90mm*60mm*14mm, IT02 compact with 2.54mm pin-connector, with the WEB server inside, it is the ideal solution for today's networked embedded applications.
The IT02 module based on TI Technology , suitable with ADSL,ADSL2,ADSL2+ standard, with TI high-performance digital signal processing technologies ,MESTECH helps the customer design the greater performance, increased power efficiency, higher precision, more mobility and better quality products.
- DSL modem supports standards for ADSL, ADSL2 and ADSL2+
- Downstream rates up to 24 Mbit/s, upstream rates up to 1 Mbit/s.
- Supports PPPoA, PPPoE, MPoA and CLIP network protocols.
- 10/100baseT, Auto-MDI/MDIX Ethernet port.
- Ethernet port supports TCP/IP, other IP protocols.
- Compatible with various SCADA protocols.
- Built-in DHCP server.
- NAT router for remote access to devices attached to Ethernet and Serial ports.
- Configuration via Web browser
- Extended temperature range.-10°C to +70°C
Haredware:
AR7 200MHZ processor
10/100M Base-T
Interface:
ADSL（WAN） －2 pin 2.54mm
Ethernet(LAN) －4 pin 2.54mm
Software:
ADSL Feature ANSI T1.413 Issue 2
ITU G.992.1 A (G.dmt)
ITU G.992.2 A (G.lite)
ITU G.994.1 (G.HS) in ADSL layer
ITU G.994.1, G.996.1
ITU992.5(ADSL 2+)
Ethernet Over ATM ( MpoA, RFC 1483 Bridge Mode )
Ethernet Over ATM ( MpoA, RFC 1483 Router Mode )
PPP Over ATM ( PPPoA, RFC 2364 )
IP Over ATM ( CLIP, RFC 1577 )
PPP Over Ethernet ( PPPoE, RFC 2516 )
Environment:
Operating Temperature: -20°C ~ 70°C;
Storage Temperature:- 40°C ~ 90°C;
Operating Humidity: 10% ~ 90% non-condensing;
Storage Humidity: 5% ~ 90% non-condensing
Power:
5VDC or 3.3VDC
5V: MAX 2.8watt
3.3V: MAX 2watt
Dimension:
L: 90mm （5.08 inch）
W: 60mm （2.36 inch）
H: 14mm （0.55 inch） |
Embedded Communications Module 