Embedded ADSL Module

This embedded ADSL Module based on the main DSL solutions company (CONEXANT)’s VULCAN chipset , especially useful for portable ADSL2+ Tester, its compact size and rugged design make it a perfect tool for ADSL technicians and engineers for field use.

IC02 is commonly used as test subscriber telephone connectivity and line parameters. It is suitable for tier-1 ADSL applications. With the Customized Firmware, IC02 provides upstream and downstream rate measurement, error count, SNR, modem simulation, ADSL line sub-channel rate, PING and Trace testing

Feature

Customized Firmware: Test MAX rate, SNR, sub-channel rate etc
High Performance, compact cost-efficient core module
Embedded design, easy-to-use
Support Bridged and PPPoE/PPPoA mode
highly-efficient DC/DC circuit inside, Low power consumption
A variety of on-board interface
RS-232 (TTL) interface
10/100M Base-T
Extended temperature range.-10°C to +70°C

Haredware:
   AR7 200MHZ processor
    10/100M Base-T

Interface:
ADSL（WAN）－2 pin 2.54mm
Ethernet(LAN) －4 pin 2.54mm

Software:
ADSL Feature

ANSI T1.413 Issue 2
ITU G.992.1 A (G.dmt)
ITU G.992.2 A (G.lite)
ITU G.994.1 (G.HS) in ADSL layer
ITU G.994.1, G.996.1
ITU992.5(ADSL 2+)

   Ethernet Over ATM ( MpoA, RFC 1483 Bridge Mode )
   Ethernet Over ATM ( MpoA, RFC 1483 Router Mode )
   PPP Over ATM ( PPPoA, RFC 2364 )
   IP Over ATM ( CLIP, RFC 1577 )
   PPP Over Ethernet ( PPPoE, RFC 2516 )

Environment:
Operating Temperature: -20°C ~ 70°C;
Storage Temperature:- 40°C ~ 90°C;
Operating Humidity: 10% ~ 90% non-condensing;
Storage Humidity: 5% ~ 90% non-condensing

Power:
5VDC or 3.3VDC
5V: MAX 2.8watt
3.3V: MAX 2watt

Dimension:
L: 90mm （5.08 inch）
W: 60mm （2.36 inch）
H: 14mm （0.55 inch）

Add comment

JComments