Front

Mestechs Tofino 2 Switch Platform

Mestechs Tofino 2 switch platform (MPT128) is a 12.8Tbps reference system for programmable networking evaluation targeting data center, wireless and wireline applications.
MPT128 is built on Barefoot Tofino 2™ – 12.8Tbps PISATM (Protocol Independent Switch Architecture) Ethernet switch – and the Barefoot P4 StudioTM Software Development Environment.

Switch platform features and port density are summarized below:

Memory
Vcpus
Tofino 2 Device
BFN-T20-128Q
Device Series
U-series
Match Action Pipelines
Quad
System Height
1 RU
Front Panel Bandwidth
12.8 Tbps
QSFP-DD Ports
32
Max 400GbE Ports
32
Max 200GbE Ports
64
Max 100GbE Ports
128
Max 10/25/50GbE Ports
256
Tofino 2 Interface with CPU
PCIe Gen3 x4

Tofino 2 switch features:

Tofino 2 Feature Comparison vs. Tofino:

Max Throughput
6.5 Tbps
Match Action Pipelines
Quad
MAU Stages per Pipe
12
Total SRAM per Pipe
/
Total TCAM per Pipe
/
Packet Buffer
/
SerDes Line Rate
10/25G NRZ
Ethernet Port Speed
10/25/40/
50/100 GbE

Tofino 2 Feature Comparison vs. Tofino:

Max Throughput
12.9 Tbps
Match Action Pipelines
Quad
MAU Stages per Pipe
20
Total SRAM per Pipe
67% increase
Total TCAM per Pipe
67% increase
Packet Buffer
190% increase
SerDes Line Rate
10/25G NRZ
50G PAM4
Ethernet Port Speed
10/25/40/
50/100/
200/400 GbE

The switch platform is equipped with:




Barefoot P4 Studio SDE

P4 Studio Software Development Environment (SDE) provides a complete suite of tools for P4 simulation (ASIC model), P4 compilation, testing (Packet Test Framework), resource visualization (P4 Insight), runtime control plane driver (Barefoot Runtime) and ASIC driver APIs.
To assist with switch application development, a feature-rich reference P4 data plane program called switch.p4-16 is provided. Its features include:
  • IPv4/IPv6 routing – unicast, unicast RPF, multicast
  • L2 switching – learning, STP, VLAN translation
  • Load balancing – ECMP, LAG, resilient hashing
  • Tunneling – VXLAN, NVGRE, GENEVE, GRE, IP-in-IP
  • MPLS – LER, LSR, L3VPN, EoMPLS, VPLS
  • ACL – MAC/IPv4/IPv6/QoS/System ACL, PBR
  • Network Address Translation
  • QoS – classification & marking, WRED, RoCEv2, CoPP
  • Security features– storm control, IP source guard
  •  Mirroring – ingress/egress mirror, negative mirror
  • Counters – route table entry counters, VLAN/Bridge domain counter, Port/Interface counters
  • Protocol offload – BFD, OAM
  •  Multi-chip fabric support – forwarding, QoS
Barefoot model driven abstraction interface (Switch API) is provided for switch.p4-16 as well as Switch Abstraction Interface (SAI) APIs. These interfaces facilitate integration with many merchant and open source network OS (NOS), allowing users to select the appropriate NOS for their application.

System Specifications

Specification

MPT128

System Throughput
Up to 12.8 Tbps
QSFP-DD Ports
32
Maximum 400GbE Port Density
32
Maximum 200GbE Port Density
64
Maximum 100GbE Port Density
128
Maximum 10/25/50GbE Port Density
256
CPU and Storage
Intel Pentium D-1517, 4 Core@1.6GHz, 8GB DDR4 SDRAM, 128GB M.2 SSD
Board Monitor Controller
Aspeed AST1250A1-GP 400MHz
Front Panel Management Interfaces
RJ-45 1GbE Port to CPU and BMC × 1 RJ-45 Console Port to CPU × 1
USB 2.0 Port to CPU and BMC × 1
AC Power
Redundant (1+1) hot-pluggable 1500W 110-240VAC AC/DC power supplies
Physical Specifications
Rack Units
1 RU
System Dimensions (W x D x H)
17.32” × 19.97” × 1.73”
(440 × 507 × 44 mm)
Shipping Dimensions (W x D x H)
23.5” × 29.75” × 5.75”
(597 × 756 × 146 mm)
System Weight
~24 lbs (~11 kg)
Shipping Weight
~31 lbs (~14 kg)
Environment Specification
Airflow Direction
Front-to-Back
Temperature, Operating
0 to 40°C (32 to 104°F)
Temperature, Storage
-40 to 70°C (-40 to 158°F)
Relative Humidity, Operating
5 to 90% noncondensing
Relative Humidity, Storage
5 to 95% noncondensing
Altitude, Operating
0 to 10,000 ft. (0 to 3048m)

Standards Compliance

Electromagnetic compatibility, safety, environmental and transportation testing will be performed.

Please contact Barefoot Networks for details.

Shipment Contents

  • MPT128 switch system, including:
    • COM Express CPU module
    • 128GB SSD
    • PSU × 2 units
    • Fan module x 6 units
  • Power cord (6 feet / C15 Plug / 250V / 15A)
  • Rack mount brackets (left and right sides)
  • Not included: BMC console <spanclass=”s2″>cable