P4 programmable Ethernet switch Bare-Metal Hardware
Cost-effective
Bare-metal switch infrastructure for data center fabric.
Intel Tofino service solution
Designed with programmable Tofino switch silicon from Barefoot Networks.
Deploys as top-of-rack or spine switch
Supporting 25 GbE to servers, with 40, 50 or 100 GbE uplinks.
Deploys as spine switch
Supporting 40, 50, or 100 GbE ToR and spine interconnects.
Key Features and Benefits
32/65 x QSFP28 switch ports, each supporting 1 x 100 GbE, 1 x 50 GBE, or 1 x 40 GbE, or via breakout cables, 4 x 25 GbE or 4 x 10 GbE.
Layer 2 or Layer 3 switching capacity of 6.4 (32X)/12.8 (65X) Tbps (full duplex).
Supports hot/cold aisle with port-to-power airflow SKU.
All ports on front; PSUs and fans accessible from rear.
Hot-swappable, load-sharing, redundant AC or 48V DC PSUs.
4+1/9+1 redundant, hot-swappable fan modules.
Switch pre-loaded with diagnostics and with Open Network Install Environment (ONIE) for automated loading of compatible open source and commercial NOS offerings.
Compatible with SONiC open source network soſtware.
The MTBF-10032X/10065X P4 programmable Ethernet switch based on Intel Tofino service solution is a Top-of-Rack (TOR) or spine switch for high-performance data centers. In a 1RU (32X)/2RU (65X) form factor, the switch provides line-rate L2 and L3 switching across the 32/65 x QSFP28 ports, supporting up to 32/65 x 25/40/50/100 GbE connections. The MTBF-10032X/10065X can be deployed as a TOR switch supporting 25/50 GbE to servers with 40/50/100 GbE uplinks, or as a spine switch supporting 40/50/100 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware.
32/65 x QSFP28 ports. Each port supports 1x25/40/50/100 GbE or 4 x 10/25 GbE per port using breakout cables
1 x RJ-45 serial console
1 x RJ-45 1G BASE-T management
1 x USB Type A storage
Switch Silicon:
Barefoot Tofino BFN-T10-032D (Dual pipeline) (32X) /
Barefoot Tofino BFN-T10-064Q (Quad pipeline) (65X)
No PHYs, No Retimers
Intel x86 Broadwell-DE, Pentium D-1517
8 GB SO-DIMM DDR4 RAM
16 MB SPI Flash
128 GB M.2 SSD
Switching Capacity: 6.4/12.8 Tbps
Forwarding Rate: 4.7/9.5 Bpps
Jumbo frames support up to 9216 Bytes
Packet Buffer Size: 20 MB (32X)/22 MB (65X) integrated packet buffer
Dimensions (WxDxH):
32X: 440 x 509 x 44 mm (17.32 x 20.03 x 1.73)
65X: 440 x 509 x 87 mm (17.32 x 20.03 x 3.42)
Weight
32X: 10.005 kg (20.05 lb)
65X: 14.275 kg (31.47 lb)
Fans: hot-swappable 4+1/9+1 redundant fans
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 0% to 95% non-condensing
Operating Altitude: 0 to 10,000 feet
Switch is loaded with Open Network Install Environment (ONIE) soſtware installer
Compatible with ONL and SONiC soſtware
QSFP28 Port LEDs: Link Status, Activity, Rate
Ethernet Management Port LED: Link Status, Activity
Console Port LED: Link Status
System LEDs: Diagnostic, Locator, PSU and Fan Status
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC/DC
Input Voltage: 90 to 240 VAC at 50-60 Hz
